Self Adhesive Felt Baize Fabric 9″ x 9″ Olive Green

Self Adhesive Felt Baize Fabric 9″ x 9″  Olive Green


Self Adhesive Felt Baize Fabric Square For  Anglepoise 1227 Lamp Base comes in a variety of colours. These are pre cut at 9″ x 9″ old school, more than enough to cover a base. You can choose whether to follow the indent in the base or span over it and still have enough material to trim off around the sides.

One trick I use is to heat the base before fitting the fabric baize. The adhesive get’s a much better hold on warm dry metal, so don’t stick it on if the laps been in the garage over night when the paint dries etc.

Keep the lamp in the house and when you’re sure the nuts and bolts are tight and secure, turn a hair dryer onto the base for a few min’s to dry and warm the metal and a few sec’s on the fabric won’t hurt either. You’ll find the results much more effective and long lasting.

I use a craft knife after fitting our you can draw around base, then trim with scissors before fitting.

Select sample 9×9 inch for 1 lamp or larger for multiple lamps.